Electrically Dead NH 1530
captsteve
Join Date: Oct 2007 Posts: 6 Griffin, Ga |
2007-10-13 146917
After changing battery in my New Holland 1530, I tried to start it and it gave one quick surge then went completely dead electrically.
I checked the fuses in the panel on the right side of the firewall as well as the single fuse in the connector on the left side. Anyone have any ideas?
Also, after checking the fuses on the right side, I noticed some blank spaces. I think I got them back in correctly, but not sure. Anyone know which ones are needed and what amps?
Thanks,
Grass growin' I ain't mowin'
Reply to | Quote Reply | Add Photo
Electrically Dead NH 1530
kleinchris
Join Date: Jun 2007 Posts: 269 Westminster, Texas |
2007-10-13 146918
Sounds too simple- are you absolutely sure that the leads on the new battery are tight?
Also, what was the problem you were having with your old battery? ....
Reply to | Quote Reply | Add Photo
Electrically Dead NH 1530
kwschumm
Join Date: Feb 2003 Posts: 5764 NW Oregon Pics |
2007-10-13 146919
You might double check the ground. If the ground is disconnected or loose everything would be dead. It's also not unheard of for a new battery to be bad so measure the battery voltage across the battery. If it's good, measure it again while trying to crank it over. If it drops very far the battery is probably bad or way undercharged. Have you tried to jump it? ....
Reply to | Quote Reply | Add Photo
Electrically Dead NH 1530
captsteve
Join Date: Oct 2007 Posts: 6 Griffin, Ga |
2007-10-13 146921
I was on the way out when I had the problem, so couldn't try to jump it. Connections are tight. I didn't even get any lights on the console after it went dead. I'll recheck the connections tomorrow. I found a parts list on line and didn't see any more hidden fuses.
Old battery was simply old.
....
Reply to | Quote Reply | Add Photo
Electrically Dead NH 1530
earthwrks
Join Date: Dec 2003 Posts: 3853 Home Office in Flat Rock, Michigan Pics |
2007-10-13 146924
I've had a similar things happen on my TC33D. Turns out I was bumping the key to OFF with my knee. D-u-h!
Seriously though, my fue holder was caked ful of dust and the fuses were corroded. Took all of them out, cleaned the holder and the fues and works now.
Also the fuse on the left, if it's like mine, kept blowing. Now I use a small hair pin/hitch pin as a jumper. Since I leave it sitting out on jobs, I'll remove the pin as a extra security against someone driving it away. You might want to try the jumper idea---mine gets quite warm even the way it is being solid steel--let alone being a fuse. ....
Reply to | Quote Reply | Add Photo
Electrically Dead NH 1530
kleinchris
Join Date: Jun 2007 Posts: 269 Westminster, Texas |
2007-10-13 146927
Again I keep thinking "too simple"- like earthworks knee comment. I have a feeling when you figure this one out your not going to want to brag about it- but hopefully it is a laughing matter. ....
Reply to | Quote Reply | Add Photo
Electrically Dead NH 1530
captsteve
Join Date: Oct 2007 Posts: 6 Griffin, Ga |
2007-10-14 146954
Believe me, I know I am going to feel like no rocket scientist when I figure this out. To think that about 40 years ago I used to actually fool around with my own cars. Seems I forgot all I ever knew. What you don't use, well, you know.
Initially when it went dead, even instrument cluster was dead. After sitting over night, it woke up. Another try ended up dead again. After a while, the lights came back.
After church today, it jump started, but as soon as I disconnect cables, she dies. Bad alternator and bad battery?
By the way guys, I appreciate the help.
....
Reply to | Quote Reply | Add Photo
Electrically Dead NH 1530
kleinchris
Join Date: Jun 2007 Posts: 269 Westminster, Texas |
2007-10-14 146959
I would be looking for something that might have killed your last battery and is giving you the problem now. I like both those paths you suggested- could you take the battery off the vehicle you used for the jump start to see if it will run the tractor for a little bit? ....
Reply to | Quote Reply | Add Photo
Electrically Dead NH 1530
captsteve
Join Date: Oct 2007 Posts: 6 Griffin, Ga |
2007-10-14 146968
This afternoon I took off the alternator. I will be taking it to be checked tomorrow. I'll let you know what I find.
Thanks again.
Till tomorrow............. ....
Reply to | Quote Reply | Add Photo
Electrically Dead NH 1530
earthwrks
Join Date: Dec 2003 Posts: 3853 Home Office in Flat Rock, Michigan Pics |
2007-10-16 147029
An easy test for a alternator being bad (on a gas engine anyway) is disconnect the battery while the engine is running. If it quits, the alt. is bad. ....
Reply to | Quote Reply | Add Photo
Electrically Dead NH 1530
captsteve
Join Date: Oct 2007 Posts: 6 Griffin, Ga |
2007-10-16 147035
Yep,
That's exactly what I did. By the way, an auto mechanic I know said that on newer (cars, not necessarily tractors), you still need an excitability voltage for the alternator to work, and therefore engine dying after battery disconnect isn't necessarily proof of bad alternator. For what it's worth.
Had the alt checked and it is bad. Have a guy seeing if he can repair it. Will keep you posted.
thanks again ....
Reply to | Quote Reply | Add Photo
Electrically Dead NH 1530
captsteve
Join Date: Oct 2007 Posts: 6 Griffin, Ga |
2007-10-17 147077
Mystery solved. Got the alternator back from the shop today. ($50 vs $281 for a new one.) Reinstalled it and it works fine.
Thanks again for the suggestions and happy mowing. ....
Reply to | Quote Reply | Add Photo
Electrically Dead NH 1530
earthwrks
Join Date: Dec 2003 Posts: 3853 Home Office in Flat Rock, Michigan Pics |
2007-10-17 147079
The theory behind the alt being bad and disconnecting it is that there is enough residual power before the battery was disconnected (becuase the alt was already turning) that it keeps making enough power to power the ignition. Hopefully I haven't got my proverbial wires crossed on this one.
Please feel free to correct me on this one! Uh-oh I can see it now! ....
Reply to | Quote Reply | Add Photo
Electrically Dead NH 1530
Boomer1530
Join Date: Jun 2007 Posts: 8 Haymarket, VA |
2007-11-09 148029
I need to replace my battery on my 1530 (battery won't hold a charge; and it's 10 years old). I've had a number of problems with it corroding on the terminals throughout the years. It's garage-kept and only used on my little farmette property (5 acres), so I'm diappointed with its quality/design. My question is whether it's worth the ~$90 that my dealer is quoting me to get a new battery (Part #: F920DSW).
Any suggestions on whether to get a NH battery, a Tractor Supply battery, or other??? ....
Reply to | Quote Reply | Add Photo
Electrically Dead NH 1530
candoarms
Join Date: Mar 2007 Posts: 1932 North Dakota Pics |
2007-11-09 148032
Boomer1530,
Ten years on a single battery isn't bad at all. I have a New Holland battery in my Kubota, and it has performed well. (My New Holland dealer is just one mile from me.)
Due to the severe winters we have here in North Dakota, I don't expect my battery to last 10 years. The most I've ever gotten out of ANY battery, is 5 years.
I do recommend putting some grease on the battery terminals, when you replace your battery. This will help prevent the corrosion that takes place. It will also make it much easier for you to loosen the terminals when you do regular battery maintenance.
Joel ....
Reply to | Quote Reply | Add Photo
Go Top
Share This